If your Bissell ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner isn’t drawing suction as it should, it can hinder effective cleaning and leave carpets less refreshed. Fortunately, most suction issues are fixable with some straightforward troubleshooting. This guide walks you through common causes of low or no suction and provides safe, step-by-step solutions to get your cleaner back to peak performance.
Key Takeaways
| Clogged Filters | Dirty filters block airflow, reducing suction. |
| Obstructed Hoses | Kinks or debris in hoses can cause suction loss. |
| Dirty Brush Roll | Bristles clogged with hair or debris impair cleaning. |
| Faulty Motor or Fan | Electrical issues can stop suction altogether. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
TURBOSTRENGTH MOTOR TECHNOLOGY. Delivers an energy-efficient 40% more suction power and 50% noise reduction for a quiet clean.
As an affiliate, we earn on qualifying purchases.
Step 1: Turn Off and Unplug Your Cleaner
Always ensure your Bissell cleaner is turned off and unplugged before performing any troubleshooting to avoid injury or damage.
JORAIR Brush Replacement Compatible with Bissell CrossWave, 3 Multi-Surface Brush Roll 1868 + 3 Vacuum Filter 1866 Vacuum Filter, Compare to Part 1608683, 160-8683, 1608684
【Compatibility】The filter and brush replacement compatible with Bissell CrossWave 1785G,1785B,1785F,2328,2305,2305K,1785,17853,17854,17855,17856,1785Q,1785A,17852,17858,17859,1785P,1785R,1785T,1785V,1785W,2303,2306A,2306,23062,23068,2551,3888A (Please note：this kit is only compatible with Bissell...
As an affiliate, we earn on qualifying purchases.
Step 2: Check and Clean the Filters
- Remove the dirty water tank and locate the filters, usually near the water inlet or on the clean water tank.
- Take out the filters and rinse them thoroughly under running water.
- Allow filters to dry completely before reinserting.
Step 3: Inspect and Clear Hoses
- Detach hoses from the cleaner following the manufacturer’s instructions.
- Check for obstructions or debris inside the hoses.
- Use a long, flexible brush or a straightened wire to gently clear any clogs.
Step 4: Examine and Clean the Brush Roll
- Remove the brush roll from the cleaner.
- Clear away hair, string, or debris tangled around the bristles.
- Wash the brush roll with warm, soapy water, then dry thoroughly before reinstallation.
Step 5: Check the Motor and Fan Assembly
If the above steps don’t restore suction, the motor or fan may be faulty. In this case, consult the user manual or contact Bissell customer support for professional diagnosis and repair.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: 18.6 lbs
- ✔ Tank Capacity: 1.25 gallons
- ✔ Warranty: 2 years
JORAIR Brush Replacement Compatible
- ✔ Package Includes: 3 brush rolls & filters
- ✔ Price: Affordable
- ✔ Ease of Use: Simple to swap out
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo offers powerful suction with TurboStrength™ Motor Technology, ensuring a thorough clean. It features MAX Clean and Express modes, Heatwave technology, and dual DirtLifter PowerBrushes for embedded dirt removal, making it a top choice for pet owners and heavy-duty cleaning.
Pros:
- 40% more suction power
- Quiet operation with noise reduction
- Effective embedded dirt removal
- Fast drying with Express Mode
Cons:
- Can be heavy to maneuver
- Requires regular filter cleaning
- Higher initial cost
Best for: Deep cleaning heavily soiled carpets and pet stains.
Not ideal for: Light cleaning or quick touch-ups.
Bottom line: A powerful, pet-friendly carpet cleaner with advanced features for deep cleaning.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement Compatible with Bissell CrossWave provides a fresh, effective cleaning surface, ensuring your machine maintains optimal suction and cleaning performance over time.
Pros:
- Easy to install
- Compatible with multiple Bissell CrossWave models
- Helps restore cleaning power
- Affordable replacement option
Cons:
- Only compatible with specific models
- May wear out over time
- Requires periodic replacement
Best for: Maintaining optimal suction and cleaning efficiency.
Not ideal for: As a primary cleaning tool, only as replacement parts.
Bottom line: A dependable replacement brush roll to keep your CrossWave performing at its best.
Frequently Asked Questions
Why is my Bissell carpet cleaner not suctioning?
Common causes include clogged filters, obstructed hoses, dirty brush rolls, or motor issues. Following the troubleshooting steps can resolve most issues.
How often should I clean the filters?
It’s best to rinse the filters after every few uses or when you notice a drop in suction. Allow them to dry completely before reinstalling.
Can I use other cleaning solutions in my Bissell cleaner?
Use only solutions recommended by Bissell, such as the Bissell Multi-Surface Solution or Deep Clean formulas, to avoid damaging the machine.
What should I do if my motor is not working?
If troubleshooting doesn’t restore suction, contact Bissell customer support or a qualified repair technician for diagnosis and repair.
Restore Your Carpet Cleaner’s Power with These Tips
By regularly maintaining filters, hoses, and brushes, you can prevent most suction issues with your Bissell carpet cleaner. If problems persist, professional repairs may be necessary. Keeping your machine in top condition ensures deep, effective cleaning every time, making your home fresher and healthier.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
